How To Deep-Clean Shower And Kitchen Grout

Some chores are cleaned every day, while others are done only a few times a year. One of the latter is cleaning grout. Many people grout shower tiles, floor tiles and kitchen backsplashes. And all of these areas can get dust, hard water stains and other residue over time. Thankfully, the following tips are designed to clean grout as quickly and painlessly as possible.

First, mix 7 cups of water, 1/2 cup of baking soda, 1/3 cup of lemon juice and 1/4 cup of vinegar. Transfer this solution to a spray bottle and spray it on the grout that needs to be cleaned. Allow the solution to sit for a few minutes and scrub with an old toothbrush. Then simply rinse it off or wipe it off with a damp cloth.

Doesn’t seem so bad now, does it? Gutters are one of those messy cleaning jobs that we tend to put off, but this simple method should make it easier. Baking soda and vinegar are the best combination. Let’s get on with cleaning them.

A safe and easy way to clean shower tiles (and grout)

Even with all the water running, shower tile can get very dirty. That’s enough to make you skip cleaning to find it in a few weeks! And you won’t find just a buildup of dirt, but also a lot of soap scum – and even mold between the tiles! That’s when you’ll find that your tiles have gotten dirty.

Don’t let your shower become a moldy mess. Clean your shower tiles and grout with this method

What can you use to clean your shower’s tiles?

Choosing the right cleaning products for your tiles is crucial to prevent accidental damage. However, the products you use must be strong enough to remove nasty soap scum stains. Not to mention, for the safety of your home, it must be completely non-toxic!

In other words.

The cleaner you use for your tiles must be gentle, effective and safe. Did you come up with something? You need vinegar!

Using vinegar on porcelain and ceramic shower tiles

Vinegar is perfect for cleaning shower tiles and grout! It dissolves soap scum as well as tile. It dissolves soap scum and hard water stains and works as a mild mildew remover and disinfectant! However, each material reacts to vinegar in a different way. Make sure the vinegar is safe for your type of shower tile before using it!

How to clean shower tiles and grout with vinegar.

To make a DIY tile and grout cleaner, you will need white vinegar and water. Fill a spray bottle with vinegar and water in the same ratio, and you’re ready to clean! You will also need these tools.

You’ll also need these tools.

A tile and grout brush (or a stiff toothbrush)

An absorbent towel or a squeegee

If your shower has a heavy mineral buildup, bring these cleaning products with you

Baking soda

Hydrogen peroxide

Avoid using vinegar on natural stone tiles

Vinegar is an excellent non-toxic cleaner, but it is not suitable for every type of surface. If you have natural stone tiles (like travertine), it’s best to avoid vinegar. It can easily remove sealers and even discolor or corrode the stone! Instead, use the cleaner recommended by your law firm.

Instead, use a cleaner recommended by your tile manufacturer, or use a trusted cleaner for your specific material. You can find many other options besides vinegar to get the job done.

How to clean your shower tile and grout

Once you have your tile cleaning solution ready to clean the tiles in your shower, it’s mostly a matter of patience and elbow grease.

You don’t need to worry about the process.

Step 1. Pretreat soap scum and hard water stains.

If the bathroom is not so dirty, run hot water for 5 minutes. Close doors and windows to allow moisture to build up in the bathroom. Steam will penetrate the stains and loosen them.

If there is mineral buildup in the bathroom.

Spray vinegar directly on the stained area and run hot water for 10 minutes. Note: Use vinegar only if you are certain it will not harm the tiles in your shower.

Step 2 Use a cleaner.

Next, spray the tile thoroughly with the cleaner of your choice. In most cases, vinegar is the best product for cleaning shower tiles. However, if you use other cleaners, the procedure is much the same Here are the details and precautions.

Clean shower tiles with vinegar.

Mix half vinegar and half warm water in a spray bottle. Then spray the vinegar solution onto the tiles (focusing on the grout) and let it sit for a few minutes.

Step 3: Scrub the tiles and grout

Now it’s time to scrub the grout! Scrub with a tile brush. Scrub with the tile brush until the soap scum and hard water stains disappear. To clean the grout, you can use an old toothbrush. Make sure, however, that the bristles of the brush are hard enough to remove the stain.

For stubborn stains, use the cleaner again and try again and again. However, if the stain is not removed, proceed to the next step!

Step 4. Stubborn stain? Use baking soda and hydrogen peroxide!

Another inexpensive and effective way to polish shower grout is to use baking soda paste. To make this paste, simply mix 3 parts baking soda and 1 part water! Then add hydrogen peroxide. Next, add the hydrogen peroxide to the paste and mix well until all ingredients are well combined.

You can use rubber gloves when applying this paste Apply it to the dirty grout and leave it to dry. Then it is time to wipe and rinse!

Step 5. Wash the tiles well.

Rinsing may seem unnecessary, but it is important.

Vinegar will not damage most surfaces. …… As long as you don’t touch them for a long time! However, if the acetic acid in the vinegar has been in the shower for a long time, it may not be effective!

If there is any detergent residue, rinse it off before proceeding to the next step!

Step 6. Dry thoroughly

After cleaning, drying the tiles is another important but often overlooked step. You need to dry the tiles after every cleaning and after every use! Use a squeegee or clean towel to dry the tiles thoroughly!

What can I do to keep my tiles in tip-top shape?

You don’t have to wait until mold and soap scum grow in your bathroom! In addition to regular cleaning, there are habits you can adopt to avoid a filthy shower!

Here are some examples.

Tip 1. Circulate air in the bathroom

It may sound silly to think of bathroom moisture control. But it’s the only way to prevent mold! That’s why. Circulating air after a shower will help keep humidity low.

After showering, activate the exhaust fan and leave the door slightly open for 15 minutes!

Tip 2. Remove excess water after each shower.

Tap water always contains mineral deposits such as calcium and magnesium. When soap and mineral deposits interact, the result is soap scum! However, soap scum will harden. However, soap scum will harden over time, so removing it before it hardens will prevent scum from accumulating.

Use a squeegee or dry towel (or both) to remove water after each shower.

Tip 3: Reseal grout every 1-2 years.

Shower grout sealant does not last forever. Constant water flow and frequent cleaning will gradually break down the sealant. Without the proper sealer, the grout will not be protected and may promote mold growth. Besides, sealed grout is easier to clean! What is the most important thing?

What is the most important thing? Sealing grout can be done by yourself and it doesn’t take much time!