Cleaning & HouseholdLife Style

How To Easily Remove Mold And Mildew From Bathroom Caulking

How To Easily Remove Mold And Mildew From Bathroom Caulking - Cleaning & Household 2024 | PopcornTime

Caulking is a necessary part of the bathroom. It is applied to prevent water from entering through the cracks in the tub or shower and causing mold and mildew. However, caulking can become moldy over time and difficult to clean. But not from now on.

Jessica from This Blessed Life reveals that you only need two things to remove mold from bathtub caulking: cotton rolls and bleach. A cotton roll is a ball of cotton that has been broken down into one long strip. The cotton is then simply soaked in bleach and placed on top of the caulk.

Jessica recommends using a Q-tip to press the cotton coil onto the caulk so that the skin does not come in contact with the bleach. You may also want to wear rubber gloves when handling cotton coils. It is also necessary to ventilate by turning on an exhaust fan or, if possible, opening a window when left unattended (at least for a few hours).

After a while, remove the cotton coils and wipe the surface with a damp cloth. Jessica says that since trying this cleaning method, the mold has not reappeared. If you have mold in your bathroom, too, it’s worth trying this simple but effective method.

How to remove mold from shower caulk and tile grout

Bright, clean shower caulk and grout can make your bathroom look vibrant, but getting rid of mold requires a special plan of action. The challenge: Mold thrives in warm, humid environments – just like your shower! That’s why you have mold in your shower. With mold, it’s not for you. Mold thrives in warm, humid environments – just like your shower With mold, it’s not enough to just scrub.

How to clean caulk and remove mold from shower caulk

The best way to remove mold from your shower caulk or tile grout is to use a bleach solution. A thorough cleaning should remove any debris from the caulk and allow the bleach to soak in and kill the mold. Finally, the caulk and grout should be scrubbed clean to reveal your sparkling, clean shower.

How to Clean Your Shower Grout

Follow our expert tips on how to clean the grout in your shower.

  • Assemble your tools. Gather a broom or hand vacuum and dustpan, scrubbing sponge and an old toothbrush or soft cleaning brush.
  • Remove dust. Vacuum or sweep up any loose dust or debris from the shower floor. This will help avoid creating “mud” or spreading dirt around when spraying grout or caulk cleaning mixtures.
  • Mix. Make a bleach solution by adding 1 part bleach and 10 parts water to a spray bottle.
  • Spray. Soak shower floors and tile wall moldings with the solution. Pay special attention to any visible mold on light-colored tile grout or caulk.
  • Etc. Let the solution sit for at least 5 minutes.
  • Scrub. Gently scrub the caulk or grout with a sponge, toothbrush or other soft bristle brush.
  • Rinse. Use a clean, damp cloth or rag to wipe off the caulk.

If you find that the grout or caulk on your tile is missing, flaking or very dirty, it may be time to consider having your shower tile regrouted and/or recaulked by a professional.

Document

Remember it later

Like this recipe! Pin it to your favorite board NOW!

Pin

Leave your vote

Related Articles

Back to top button

Log In

Forgot password?

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy

Add to Collection

No Collections

Here you'll find all collections you've created before.